3D Panel Introduction
  Construction Process
  3D Panel Production Line
  Contact Us
  Online Service:
 
MSNMSNTalk
Offline Service:
Tel: +86-311-85610618
Fax: +86-311-85060638
Add: Development Zone of Shijia
zhuang City, Hebei Province, China
Office: 600, Zhongshan East Road
Shijiazhuang.
Email: epsmachine@xuelongqiye.com
xuelongqiye@hotmail.com
 
3D Panel is a load bearing wall building material which adopts 3-dimension spatial steel wire mesh frame as the framework, anti-flaming polystyrene (EPS) foam panel or rock wool panel as heat protective core layer. External layer of the wall building material is sprayed with the pea gravel concrete or slush. It can be used to build the self-support.
 

Characteristics of 3d panel

Efficient Use of Petroleum

The expanded polystyrene insulation used in 3D Panel is made of petroleum-derived styrene; however, this light-weight foam product is 98% air and requires only a small amount of petroleum to produce.

Environmentally

This is no CFC blowing agent in EPS panel cores, which does not threaten the earth's ozone layer. In addition, the production of the EPS used in our 3D Panel does not produce CFC's or HCFC's or formaldehyde and does not produce harmful off-gassing.

Reducing Waste at the Job Site

3D Panel greatly minimizes the amount of onsite scrap produced at the jobsite thus reducing the amount of job waste in landfills.

Concrete as a Sustainable Resource

Concrete is a friend of the environment in all stages of its life span, from raw material production to demolition, making it a natural choice for sustainable home construction.

Minimal waste

Concrete can be produced in the quantities needed for each project, reducing waste. After a concrete structure has served its original purpose, the concrete can be crushed and recycled into aggregate for use in new concrete pavements or as backfill or road base.

Reflectivity

Concrete minimizes the effects that produce urban heat islands. Light-colored concrete pavements and roofs absorb less heat and reflect more solar radiation than dark-colored materials, such as asphalt, reducing air conditioning demands in the summer.

Resource efficiency

The predominant raw material for the cement in concrete is limestone, the most abundant mineral on earth. Concrete can also be made with fly ash, slag cement, and silica fume, all waste byproducts from power plants, steel mills, and other manufacturing facilities.

Durability

Concrete builds durable, long-lasting structures that will not rust, rot, or burn. Life spans for concrete building products can be double or triple those of other common building materials.
In a world grown accustomed to evolutionary change, one remarkable building system is marking a truly revolutionary impact on global construction methods.
This product is called 3D panel. It is a polystyrene core with reinforced steel mesh on the outside which you shoot 1.5 inches of concrete to each side for strength and thermal mass. One of the most intriguing aspects of the product is that it is an energy efficient material to use for the exterior walls of structures. The use of this product along with other efficient materials in the construction of homes and commercial buildings led us to buy the regional distributorship for 3D panel and start building homes using the “Green Concept ".
We strongly propose the widely usage of this new green material----3D panel.

 
 
Onlinechat